Following the success of the CT2260 and its first ViBRA-16 card, the CT2800 or Sound Blaster Vibra 16S, uses an updated chip - the ViBRA 16S (CT2504). Some CT2230 cards (board revision 49432) do not get header pins on both the Sony and Mitsumi CD-ROM headers, leaving the Panasonic header as the only one you can use. We recommend when installing a CD-R (compact disc recordable) or CD-RW (compact disc re-writable) drive that the drive be set up as the primary drive on the second IDE/EIDE interface. Having the drive as the primary helps prevent buffer underruns when creating a CD. Attach cables

The CT2749 was identical to the CT2740 but was marketed without the CSP/ASP chip (though still supported this option). More Images The CT2919 was the non-"Value Edition" version of this card, designed for the OEM market. More Images Once connected, turn on the computer and enter BIOS setup. Verify that the IDE (integrated drive electronics) device is set up as Auto or CD Drive. Once verified, save the settings and reboot the computer. Creative Labs introduced the 2nd generation of Sound Blaster 16 cards in 1994, starting with the CT2230. The key difference from the 1st generation is that the Yamaha YMF262 was now gone as a discrete chip. Instead Creative Labs integrated the YMF262 into their own chip called "CT1747". These chips got the official "OPL" logo stamped on them, as they did contain the Yamaha circuitry inside. Also sadly gone was the hardware thumbwheel volume control.

Buying tips and help

Called the Sound Blaster 16 MCD (Multi CD), the CT1750 was a CT1740 but with better support for CD-ROM drives - it got The CT2230 and CT2290 seem to be the most loved SB16s because they offer the lowest noise output of all the SB16 cards and are not Plug & Play. This is good because we retro gamers like to have our choices at the hardware level! Plug & Play was in its infancy in 1994, and would make configuring your card almost impossible outside of Windows. The CT1745A mixer chip from 1992 got an upgrade during this 2nd generation to CT1745-S (1993) and later to CT1745A-S (1994), though the first CT2230 cards still came with the original CT1745A.

The Sound Blaster 16 ASP comes with a powerful mix of applications, including two programs for sampling in Windows. WaveStudio is limited to sampling and editing what will fit in system memory (about a minute of 44 kHz sampling). If that's enough, you'll enjoy its intuitive interface and strong editing capabilities. Soundo'LE is the appropriate application for creating longer samples and embedding them into OLE-aware applications. The Sound Blaster 16 mixer, which you can access from Soundo'LE's menus, is very powerful and easy to use."InfoWorld, 11 Jan 1993 You can also compare this card's audio output side-by-side to numerous other cards in my Sound Blaster CT2770 Retro Review!CT2772 was the same as the CT2770A, but got FCC ID: IBACT-SB16NCDR, which I can only assume means "No CD-ROM", as it didn't come with a CD-ROM interface, but this card did come with a wavetable header which is odd for a value edition card...

The CD Jumper is a stylish and versatile piece that adds a touch of sophistication to your wardrobe. With its classic design and high-quality construction, this jumper is a must-have for any fashion-conscious individual. The MPU-401 interface on the 15-pin game/MIDI port continued to be non-standard (the pinouts differ from the Roland standard).This is a Value edition card and is the OEM version of a CT2959. It has the ViBRA 16S chipset and a real full-size Yamaha YMF262 (OPL3) chip. This was the first Creative card to use their new CT1705 bus interface chip which provided it with full Plug & Play capability. Most other 2nd-generation SB16s had the bus interface logic embedded in the CT1747 chip or in the ViBRA chip (CT2501 or CT2504) on ViBRA cards. They made these same cards from 1993 through 1995, so DSP versions 4.05 through 4.13 were all used. With its timeless design and clean lines, the CD Jumper exudes elegance and versatility. It can be easily dressed up or down, making it suitable for various occasions and outfit combinations. Sound Blaster 16 Value edition. Most of these have the CT1978 CQM FM synthesizer chip which is almost universally considered poorer quality than a true Yamaha OPL3 chip (some CT2980 cards have the original Yamaha chip which is preferable). If it has the Yamaha chip instead, this is one of the lowest-noise SB16 cards you will find. Most third-generation cards come with the Creative Labs CQM chip instead of true OPL3 Yamaha chip, but there are cases where a Yamaha chip is present. The vast majority of these cards are jumper-free and are fully ISA Plug & Play. CT2910 /CT2911 / CT2919